NineSigma, the most experienced and advanced Open Innovation service provider in the world has acknowledged us as „NineSigma Multiple Contract Winner”.
We put into our offer new laboratory ultrasonic scanners. Fast vibration-free measurement devices with data acquisition system, including A-Scan, B-Scan 2D, 3D, C-Scan 2D, 3D, SAFT, Phased array 2D, 3D. Measuring system for SAW Spiral Welded Pipe with 8, 16, or 32 channels for on-line Ultrasonic Examination of WELD, HAZ and BODY was created. We have created a system for seamless pipe on-line Ultrasonic Examination with 8, 16, or 32 channels. The manufacturing of a new family of stepper motor (OPCOM) and DC drivers was started. Ideal for applications in laboratory and industry. We start the production a new version of OPBOX ver 2.0. Together with the standard program it becomes an ideal system for use in testing (NDT) as well as for operating of hand-held and automated scanners systems, in the laboratory and in industry. We prepare an automatic ultrasound system to recognize the type of battery for one of our clients.
We prepare an automatic ultrasonic weld quality control system of multilayer films for special applications for Ferrero.
We implement in our applications, measurement systems, data acquisition of ultrasonic technology Nvidia CUDA technology thus achieving the possibility to visualize of 2D and 3D in a real-time
The offer of power transducers for classic applications: welding, joining of materials, sonochemistry, power transducers in measuring systems is growing.
A multi-channel D-class amplifier for ultrasonic applications is designed.
The next version of the system for the detection of boiling is delivered to our customer. The system is now ready to optimize before launch commercially.
We include in our offer multiplexers and power generators (100W) for special applications .
New phased array measuring probes are created.
We install several systems for monitoring of plastic pipes during production.
We work on a new version of “lock-in amplifier system” for use in ultrasonic measurements
A special adapter, called OplabBox is created. It includes pulser, amplifier, filters and trigger generator. Together with a standard oscilloscope it can create a small ultrasonic laboratory, allowing the use of one or two ultrasonic transducers.
A system for density measurement of sediments is developed.
A cavitation meter is developed.
We conduct research on the ultrasonic system for measuring the gap in heterogeneous and attenuating materials.
We put into the production new version of the OPPA multiplexer (Phased Array) in 32 channels design.
We put into the production of a new version of the ultrasonic testing card OPCARD with the new NDT program.
Start of manufacturing of a new version of power generator, for use especially in material welding and cutting processes - OPWELD 1kW.
New industrial ultrasonic scanner for measuring cracks and fissures in internal openings of shafts of power plant generators is developed. It allows to investigate flaws in 6m long pipes.
A device for measuring the thickness of layers OPTHICK is created.
The new generation of measurement probes in the system of ultrasonic inspection of electron beam welded gear wheels has been launched in the Wittenstein factories.
KICK OFF of WINTUR project in Cambrigde, UK. The goal is wireless monitoring of terrestrial and marine wing of windmills with the use of energy harvesting technology. We participate in international workshops in Singapore – part of HIDE project. The next meeting of the HIDE project consortium also has a place in Singapore.
We participate in a Policy Forum on Privacy as Contextual Integrity in Prague, as part of HIDE project. We prepare an ultrasonic measuring system adapted to the final version of the measuring heads at the Railect project. Work on the new versions of measurement cards OPCARD series and new power generators. Work on a new version of the ultrasonic camera with integrated additional finger detection device.
Work on ultrasonic tomography system to measure the distribution of moisture in construction materials. A new and more versatile special scanner is created. Finalizing the software. We test an ultrasonic siren designed and build for the project for Sealed Air. Completing subsequent phases of the Kraft projekt. The project at the experimental stage brings very concrete effects already. We put into production new version of OPMUX-03 multiplexer in 4 channels design. We fulfill orders for new ultrasonic modems. Design underway of a new version of ultrasonic camera fingerprint recognition.
We continue to work on projects for companies Sealed Air and Kraft. During the project HIDE arises database of biometric technologies. We start the project with the goal to create a new version of power generator (combined modular 1k, 2k, 3k, 4KW) to meet great interest of our clients. We fulfill orders for our current measurement systems; OPLABBOX, OPBOX, OPCARD, UG SA power generation and our transducers and ultrasonic measuring heads become very popular.
We work on projects for companies Sealed Air and Kraft Technical Meeting RAILECT Project (Cambridge, UK) - working on a new system of ultrasonic inspection of railway rails. We adopt a new version of our ultrasonic measurement card and the multiplexer for this particular system.
Hide - technical meeting.
We are taking part in "HIDE Policy Forum on Outsourcing of Systems for Detection, Identification, and Authentication" that is part of HIDE project
University in Bydgoszcz receives from us new ultrasonic scanner with ultrasonic positioning unit (A-Scan, B-Scan and C-Scan in 2D i 3D)
We continue to work on projects for Sealed Air and Kraft
The work on the ultrasonic tomography system for humidity distribution in solid materials.
PC controlled burst generator (UG SG) is created - for exiting ultrasonic transducers with output frequencies from 500Hz to 500kHz in 4 channel version, with the possibility to increase the number of channels.
We are installing 3 further systems for measurement of plastic pipes during production.
For Wittenstein AG we are installing two special made systems for controlling the quality of electronic beam welded toothed wheels: one system with 7 dry contact heads with circular transducer movement, one system for immersion testing.
New versions of power ultrasonic generator UG SA with sweep function are created.
We are developing new versions of OPBOX - with external trigger and burst generator.
Kick Off meeting of Railect project
We are changing our web presence, add new information. We are sorry for eventually occurring problems
Begin of a new EU FP7 project - Wintur
We start the development of an ultrasonic system for the measurement of moisture distribution in porous construction materials. The system will be based on ultrasonic tomography.
A new complex industrial project is started, having the goal to measure the gap between two metal sheets.
After years we are coming back to the work on our ultrasonic fingerprint recognition, recognizing living and true fingers - with new ideas, new technique and actual demand for this technology.
For our new customer from India we are preparing a complex system (with 16 channels) for the measurement of steel pipes during production.
New R&D project for Sealed Air is started.
New system for plastic pipe measurement is installed in India.
Based on many years experience and confidence of our German customers - using our power ultrasound generators - we are starting to develop a new version of this generator. Our plan is to make a generator with up to 4kW for classical types of use: ultrasonic cleaning, welding, etc.)
We develop a cavitation meter, that can be used in ultrasonic fields causing cavitation.
U-top is created. We are staring the production of our portable, pc - based ultrasonic flaw detector.
The first stage of the project with the goal to create the detector of boiling process is finished. Working prototype is created. Patent in preparation.
The first version of the device for measurement of thickness and position, based on air ultrasound is created.
RiserTest project is finished with significant success. Measuring system is created. Deep sea tests in Norway accomplished.
New EU FP7 project is started - Railect.
New systems for plastic pipe measurement are created . With 16 and 32 channels . This time with our own measuring head project, that allows measurements in a wide spectrum of pipe diameters.
For the University of Bydgoszcz a new generator for the measurement of light diffraction of sound waves is made.
New ultrasonic scanner are created - with a,b, c, 2D and 3D scans and phase contrast.
The work on the 2D acoustic positioning system for use in our scanners and precision higher than 1 micrometer is created.
We are starting the manufacturing of new multiplexers with 4, 8, 16 and 32 channels.
We are starting the project with the goal to create a complex system for flaw detection in electron beam welded transmission toothed wheels.
New generation of step motor controllers for the use with ultrasonic scanners is created.
We add a sweep function to our power ultrasound generators.
Acoustic amplifier for Grecon is finished and delivered.
As a part of RiserTest project, so called "ultrasonic antenna" is created.
University of Poznan gets our scanner for measurement of fluid parameters in strong magnetic fields.
The development of new versions of our ultrasonic card with PCI Express, PCI and PC 104 interface is started.
Further Systems for plastic pipes measurement during production are installed.
The first version of the device for the measurement of coated foils is transferred to the customer. It should measure the quality of the coating and its adhesion.
Our first handheld device for ultrasonic testing, based on PC mainboard is developed. We are planning to start the marketing of this device in the first half of the year.
We finish the work on a special 2 axis laboratory ultrasonic scanner for Politechnika Lubelska, equipped with ultrasonic positioning unit.
A special 3 axis laboratory ultrasonic scanner for University in Bydgoszcz will be ready – with ultrasonic positioning unit and phase contrast.
A system for contact less thickness measurement is ready (ultrasonic caliper).
A system for measurement of magnetic fluids in strong magnetic fields (special scanner) is ready and transferred to the University of Poznan.
For our German partner – Fraunhofer IWU (Chemnitz) and for two polish customers a series of new Ultrasonic Power Generators with integrated analyser is prepared. A series of this devices is build.
We are starting the work on the project „boiling point detector”.
We are working on the acoustic amplifier, that will be used by our german partenr for the measurement of very weak acoustic signals.
The production of our OPBOX – ultrasonic test device with USB 2.0 Interface begins.
Within the EU FP7 framework the project HIDE is initiated (Homeland Security, Biometric Identification & Personal Detection Ethics, Grant agreement: 217762 – continuation of BITE). Kick off meeting takes place at 15th February in Roma.
EU (within the 7FP) accepts the financing of the project Railect (Development of an ultrasonic technique, sensors and systems for the volumetric examination of alumino-thermic rail welds). We are the partner in this project. The coordinator is TWI (UK).
The project TareIt (6FP) ends officially.
Project RaiserTest is prolongated 6 months. We have build for this project a special ultrasonic multiplexer with software controlled delay between the channels, that should be the basis for the „ultrasonic antenna”.
After 14 years of work in Otwarta street, Optel has moved to a new location in Morelowski street. Our new address is now: ul. Morelowskiego 30, 52-429 Wroclaw.
We deliver to the Physical Faculty of University in Poznan the first part of a system for measurement of acoustical parameters of magnetic fluids
We deliver to the Technical University in Gliwice a system for the measurement of acoustical parameters of metals in higher temeperatures.
OPTEL is invited to take part - as an expert for biometric technology - in HIDE project, a successor of the very successful BITE project in 7th EU FP.
TWI The Welding Institute from Cambridge invites us to take part in many R&D projects, that can be started in the 7th EU FP.
We begin the work on the new version of our ultrasonic testing card with PCI express interface.
We are taking part in the event, organized on the occasion of 10 years of existence of Polish-German Industry and Trade Chamber, reporting about 10 years of our cooperation.
We are taking active part in our EU projects RISER Test, Tare It, Bite. Many technical meetings, investigations are made, reports prepared, etc.
The U.S. Department of Homeland Security Privacy Office and US-VISIT invites us to take part in the "International Conference on Biometrics and Ethics", Washington DC USA
NATO invites us to the conference: IDENTITY, SECURITY AND DEMOCRACYSOCIAL, ETHICAL AND POLICY IMPLICATIONS OFAUTOMATED SYSTEMS FOR HUMAN IDENTIFICATION; JERUSALEM (Israel)
We are taking active part in our EU projects RISER Test, Tare It, Bite. Many technical meetings, investigations are made, reports prepared, etc.
Wroclaw Center for Technology Transfer invites us to present our experience with CRAFT projects during the workshop: "European Funds for Lower Silesia, Preparation for 7th EU FP"
As a part of BITE
project we are organizing international conference about the future of biometric technologies in Wrocław
As an expert for biometric techniques we are taking part in the conference: Ethical and Social Implications of Biometric Identification Technology: Towards an International Approach, organized by EU Commission in Brussel.
OPTEL is invited to take part in RISER TEST project (Development of a Guided Long Range Ultrasonic Inspection System for the examination of offshore subsea Risers, Steel Catenary Risers (SCRs) and Flowlines) - 6th EU FP.
Participation in the BITE conference: THE EUROPEAN INDUSTRIAL CONTEXT, organized by HumanScan, Erlangen,
OPTEL is invited to take part in TARE - IT project: A Novel Tare Identification and Corrosion Detection System to Improve Filling Accuracy, Productivity and Safety for SME LPG, Butane & Propane Gas - 6th EU FP.
We are working on the project with goal to establish yield of oil from old oil wells, that are able to deliver only small amount of oil. An innovative solution is proposed.
Participation in the BITE conference: BIOMETRICS AND MIGRANTS organized by IOM - International Organization for Migration (UN) Geneva
Participation in BITE conference: BIOMETRICS AND PRIVACY organized by: CESAGEN (Centro per la Scienza, la Societa e la Cittadinanza ), Roma, Italy.
Participation in the conference: BIOMETRICS AND GENETICS Organized by: The CENTRE FOR THE ECONOMIC AND SOCIAL ASPECTS OF GENOMICS (a collaborative centre between Lancaster and Cardiff universities that works with the relevant genomics science whilst attempting to clarify the human (social and economic) factors which shape these natural knowledge) in Lancaster, UK.
OPTEL is invited to take part in BITE project, belonging to the 6th EU FP.
2003 - 2004
We are proposing and conducting many R&D projects
, among others: System for the visualization of internal 3D structure of the heart; Ultrasonic tomography for the measurement of thickness of hardened close to surface layer in half-axis. Liveness detection of fingers in ultrasonic finger recognition devices. Acoustic marks for detection of authenticity of bank notes and other documents. Precise measurement of shape of bones with the help of acoustic holography. Acoustical holography for medical purposes. Local measurement of mechanical properties of materials with a simple acoustic measuring head.
We are working on following projects
: Measurement of thickness of walls of pipes lying on the sea bottom. Fluid parameter measurement. Measurement of alcohol concentration in water. Investigation of the state of old wood pieces with the help of ultrasound. Contactless optical recognition of fingerprints. Ultrasonic control of chemical processes
We are installing special sonar systems for the measurement of thickness of sediments layers in a water power plant in Taiwan.
Second version of our ultrasonic testing card and ultrasonic testing box with parallel interface is created.
First large R&D projects, that has nothing to do with biometric technologies are started. They are made for Music Academy in Warsaw and has the goals to create an ultrasonic device for soft palate investigation and for the measurement of vibration of the scull of singing person. Both projects are financed by the KBN (Polish Science Comitee).
1999.12 - 2000.10
Agnieszka Bicz, as IT expert, takes part in the EU 5th Framework Project, coordinated by Mieczyslaw Pluta.
We are using our experience, collected during the many years of work on biometric project and propose ultrasonic devices and measurement systems.
Prototypes and a vision of commercial product for ultrasonic recognition of fingers are ready.
Wiesław Bicz is moving his R&D activity to Wroclaw and takes over OPTEL
OPTEL is established.
Wiesław Bicz - director and owner of OPTEL - begins the work on the biometric project in Frankfurt Main in Germany.