-Supply Voltage: 230V/1A
Size (LxWxD): 340x295x140 [mm] 13.4x11.6x5.5 [inch]
-USB 1.1 - 2.0 full speed
-out for stepper motor controller DB9 male art
-out for measuring head with DC motor,
encoder and limit switch DB9 female art
- 1 trigger BNC emergency switch
Stepper motor power supply 35V, 2.5A/phase Motor type 2-Phase Step number Max 16777215
Frequency Max 65535 Hz
Power supply of DC motor 10 - 24V, max 6A rotational speed control
Short circuit protection
Support for encoder at DC axis division max 254
Output "out1" supports stepping motor,
output "out2" - DC motor. Trigger signal
can be produced by stepper motor
channel as well as DC motor channel.
Both of channels are limit switches
sensitive. Control by simply orders is
providing by USB connector with PC.
Optionally, it is possible to make hardware versions for the special needs of the user.
Copyright © 1989 - 2019 Optel. All rights reserved.
Limited, registered in the Companies Register by the regional court Wroclaw Fabryczna, VI Industrial Section of KRS, under the number 0000124439,
NIP: PL 8981047033, REGON 008375538, operating capital 364,500 PLN